Differences

This shows you the differences between two versions of the page.

--- en:guide:planetary-interaction [2023/05/14 23:45] – BJK
+++ en:guide:planetary-interaction [2023/05/14 23:47] (current) – BJK
@@ Line 92: / Line 92: @@
 After you've found a planet you're interested in, time to set it up!
+CAUTION: PI is extremely large. It is advised to set this up in a small range of systems, or in a system in the [[https://www.e-351.com/buyback/panda-logistics|buyback programme]].
 ==== SETUP ====
@@ Line 162: / Line 164: @@
 Select your planet, select the Extractor Head, stop the extraction, move the heads wherever the resources are most abundant, then restart the extraction.
-With 8 Facilities (Level 5), you will have a maximum output of 320 units of P1 per houor, assuming your extractors continously yeild above an average of 48k units per hour.
+With 8 Facilities (Level 5), you will have a maximum output of 320 units of P1 per hour, assuming your extractors continuously yield above an average of 48k units per hour.
-With 160 (60.8m3) going to each launchpad (10,000m3) per hour, you will need to collect your PI once every 6 days and 20 hours at max yeild.
+With 160 (60.8m3) going to each launchpad (10,000m3) per hour, you will need to collect your PI once every 6 days and 20 hours at max yield.
-With 120 (45.6m3) going to each launchpad (10,000m3) per hour, you will need to collect your PI once every 9 days and 3 hours at max yeild.
+With 120 (45.6m3) going to each launchpad (10,000m3) per hour, you will need to collect your PI once every 9 days and 3 hours at max yield.
 Once your launchpads are full, travel to their Customs Office with your Epithal and bring them back to a station.